Greens - Instruments

Tools use for distractor for tibia and Femur Small,Electronic Tourniquet,Esmarch Rubber,Paedritic Tibial & femur Reduction Device (F-Tool small),Pneumatic Tourniquet, Complete with 3 cuffs inflation bag and gauge in the carrying case with pump Sterilization Tubes (Suitable for Pin,K,Wires Drill Bits), Sterlization Tubes ( Suitable for ilizarov Wire), Skin Grafting Handle, Skin Grafting Knife, Small Skin Grafting Handle, Large Distractor for Tibia & Femur.

Trocar

Spine Distractor

ELECTRIC INSTRUMENT

Trocar

Spine Distractor

ELECTRIC INSTRUMENT

Greens - Instruments Products

AWLS

#	Cat. No.	Metal	Sizes
1	401.010	SS	Bone Awl with Fibre Handle- Ø 1.2mm, Curved
2	401.011	SS	Bone Awl with Fibre Handle- Ø 1.2mm, Straight
3	401.025	SS	Bone Awl with Fibre Handle- Ø 1.5mm, Curved
4	401.030	SS	Bone Awl with Fibre Handle- Ø 3.0mm, Curved
5	401.031	SS	Bone Awl with Fibre Handle- Ø 3.0mm, Straight
6	401.040	SS	Bone Awl with Fibre Handle- Ø 3.5mm, Curved
7	401.041	SS	Bone Awl with Fibre Handle- Ø 3.5mm, Straight
8	401.050	SS	Bone Awl with Fibre Handle- Ø 4.0mm, Curved
9	401.051	SS	Bone Awl with Fibre Handle- Ø 4.0mm, Straight
10	401.100	SS	Kuntscher\'s Diamond Pointed Awl- Curved
11	401.101	SS	Kuntscher\'s Diamond Pointed Awl- Straight
12	401.106	SS	Square Nail Awl With T- Handle
13	401.107	SS	CANNULATED STARIGHT AWL
14	401.108	SS	Enders Nail Awl
15	904.135	SS	AWL WITH T HANDLE (CANNULATED)

BENDER

#	Cat. No.	Metal	Sizes
1	1623.003	SS	Bending Iron for Ø2.0mm Maxillofacial Plate / Mini Bone Plate (Pair)
2	1623.005	SS	Bending Iron for Ø2.7 and 3.5mm
3	1623.010	SS	Bending Iron for Ø3.5 and 4.5mm
4	402.130	SS	Roller Plate Bender- Large(for Narrow & Broad plates)
5	402.150	SS	K. Wire Bender
6	402.160	SS	Bending Iron for Reconstruction Plates Ø3.5 and 4.5mm
7	402.170	SS	PLATE BENDER Small
8	402.195	SS	BENDING ROD 3.0MM / 3.5MM
9	402.200	SS	BENDING ROD 4.0MM / 4.5MM
10	402.205	SS	RUSH NAIL BENDER
11	402.206	SS	Bending Template
12	402.207	SS	PLATE BENDER TEMPLET Ø 3.5
13	402.208	SS	PLATE BENDER TEMPLET Ø 4.5
14	402.210	SS	Pelvic PlateTemplate –straight
15	402.212	SS	Pelvic PlateTemplate – curved
16	402.214	SS	Pelvic PlateTemplate – J type

BONE HOLDING CLAMPS Lowman's Bone Holding Clamps

#	Cat. No.	Metal	Sizes
1	403.125	SS	Lowman's Bone Holding Clamp- 125mm Small (for Forearm Bones)
2	403.160	SS	Lowman's Bone Holding Clamp- 160mm Medium(for Humerus)
3	403.200	SS	Lowman's Bone Holding Clamp- 200mm Large(for Femur & Tibia)
4	403.202	SS	Lowmans Bone Holding Clamp- 300mm Extra Large
5	403.300	SS	Burn Bone Holding Forcep

Lane's Bone Holding Froceps

#	Cat. No.	Metal	Sizes
1	1723.720	SS	Lane's Bone Holding Forceps without Rachet- 200mm
2	1723.725	SS	Lane's Bone Holding Forceps without Rachet- 250mm
3	1723.730	SS	Lane's Bone Holding Forceps without Rachet- 300mm
4	404.200	SS	Lane's Bone Holding Forceps with Rachet- 200mm
5	404.250	SS	Lane's Bone Holding Forceps with Rachet- 250mm
6	404.300	SS	Lane's Bone Holding Forceps with Rachet- 300mm

BONE SPREADER

#	Cat. No.	Metal	Sizes
1	407.140	SS	Bone Spreader- 140 mm
2	407.210	SS	Bone Spreader- 210 mm
3	407.270	SS	Bone Spreader- 270 mm

BONE CUTTER

#	Cat. No.	Metal	Sizes
1	1723.449	SS	Bone Cutting Forceps- Double Action, 190 mm, Curved
2	408.190	SS	Bone Cutting Forceps- Double Action, 190 mm, Straight
3	408.225	SS	Bone Cutting Forceps- Double Action, 225 mm, Straight
4	408.226	SS	Bone Cutting Forceps- Double Action, 225 mm, Curved
5	408.227	SS	Bone Cutting Forceps- Double Action, 225 mm, Angular
6	408.270	SS	Bone Cutting Forceps- Double Action, 270 mm, Straight
7	408.271	SS	Bone Cutting Forceps- Double Action, 270 mm, Curved
8	408.350	SS	Tudor Edward Bone Cutting Forcep

BONE NIBBLER

#	Cat. No.	Metal	Sizes
1	1706.317	SS	Bone Nibbler- Double Action, 270 mm, Curved
2	1723.205	SS	Bone Nibbler- Single Action - 150MMStraight
3	1723.215	SS	Needale Bone Nibbler Double Action, 150 mm, Angular For Hand Fixation
4	1723.219	SS	Bone Nibbler- Double Action, 190 mm, Straight
5	1723.222	SS	Bone Nibbler- Double Action, 225 mm, Straight
6	1723.227	SS	Bone Nibbler- Double Action, 270 mm, Straight
7	1723.290	SS	Bone Nibbler- Double Action, 190 mm, Curved
8	1723.305	SS	Bone Nibbler- Double Action, 225 mm, Curved
9	1723.349	SS	Bone Nibbler- Double Action, 190 mm, Angular
10	1723.352	SS	Bone Nibbler- Double Action, 225 mm, Angular
11	1723.357	SS	Bone Nibbler- Double Action, 270 mm, Angular

CHISEL

#	Cat. No.	Metal	Sizes
1	1761.405	SS	Chisel with Fibre Handle-5 mm
2	1761.410	SS	Chisel with Fibre Handle- 10 mm
3	1761.415	SS	Chisel with Fibre Handle- 15 mm
4	1761.418	SS	Chisel with Fibre Handle- 18 mm
5	1761.420	SS	Chisel with Fibre Handle- 20 mm
6	1761.425	SS	Chisel with Fibre Handle- 25 mm
7	1761.430	SS	Chisel with Fibre Handle- 30 mm
8	1761.500	SS	HOLLOW CHISEL

Gouge

#	Cat. No.	Metal	Sizes
1	1761.525	SS	Gouge with Fibre Handle- 25 mm, Straight
2	413.050	SS	Gouge with Fibre Handle-5 mm, Straight
3	413.051	SS	Gouge with Fibre Handle-5 mm, Curved
4	413.060	SS	Gouge with Fibre Handle-6 mm, Straight
5	413.061	SS	Gouge with Fibre Handle-6 mm, Curved
6	413.100	SS	Gouge with Fibre Handle- 10 mm, Straight
7	413.101	SS	Gouge with Fibre Handle- 10 mm, Curved
8	413.120	SS	Gouge with Fibre Handle- 12 mm, Straight
9	413.150	SS	Gouge with Fibre Handle- 15 mm, Straight
10	413.151	SS	Gouge with Fibre Handle- 15 mm, Curved
11	413.160	SS	Gouge with Fibre Handle- 16 mm, Straight
12	413.161	SS	Gouge with Fibre Handle- 16 mm, Curved
13	413.180	SS	Gouge with Fibre Handle- 18 mm, Straight
14	413.181	SS	Gouge with Fibre Handle- 18 mm, Curved
15	413.201	SS	Gouge with Fibre Handle- 20 mm, Curved
16	413.202	SS	Gouge with Fibre Handle- 20 mm, Straight
17	413.240	SS	Gouge with Fibre Handle- 24 mm, Straight
18	413.241	SS	Gouge with Fibre Handle- 24 mm, Curved
19	413.251	SS	Gouge with Fibre Handle- 25 mm, Curved
20	413.300	SS	Gouge with Fibre Handle- 30 mm, Straight
21	413.301	SS	Gouge with Fibre Handle- 30 mm, Curved

CLAMP

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	413.601	SS	Charnley Compression Clamps with 2 Steinmann Pins

CURETTE

#	Cat. No.	Metal	Sizes
1	1763.200	SS	Volkman Bone Curette ( Double Ended)
2	1763.205	SS	Bone Curette with Fibre Handle- Small
3	1763.210	SS	Bone Curette with Fibre Handle- Medium
4	1763.215	SS	Bone Curette with Fibre Handle- Large

DRILL SLEEVE , TAP SLEEVE

#	Cat. No.	Metal	Sizes
1	1596.005	SS	Double Drill Sleeve- Ø 3.5/2.5 mm
2	1596.006	SS	Double Drill Sleeve- Ø 4.0/2.5 mm
3	1596.008	SS	Double Drill Sleeve- Ø 6.5/3.2 mm
4	1596.009	SS	Double Drill Sleeve- Ø 6.5/4.5 mm
5	1596.065	SS	TAP SLEEVE 3.5MM FOR TAP 3.5MM
6	1596.070	SS	DRILL SLEEVE Ø 0.8MM FOR 1.2MM CORTICAL SCREW
7	312.470	SS	Drill Sleeve Pointed (C- Pointed Drill Guide)
8	312.480	SS	Insert Drill SleeveØ 4.5/ 3.2mm
9	415.035	SS	Double Drill Sleeve- Ø 3.5/2.5 mm
10	415.045	SS	Double Drill Sleeve- Ø 4.5/3.2 mm

DISSECTORS

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	415.450	SS	Blunt Dissectors

ESMARCH BANDAGE

#	Cat. No.	Metal	Sizes
1	418.100	SS	Esmarch Rubber Bandage- 100mm
2	418.150	SS	Esmarch Rubber Bandage- 150mm

EXTRACTORS

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1706.108	SS	Broken Interlocking Nail Extractor- Ø3mm- Optional

FORCEPS

#	Cat. No.	Metal	Sizes
1	1723.302	SS	Screw Holding Forcep- Ø 1.5/2.0mm
2	1723.306	SS	Screw Holding Forcep- Ø 3.5 mm
3	1723.308	SS	Screw Holding Forcep- Ø 4.5 mm
4	1723.805	SS	Tissue forceps
5	420.080	SS	Forcep for Screw Removal 3.5MM

GAUGES

#	Cat. No.	Metal	Sizes
1	1598.010	SS	DEPTH GAUGE FOR 1.2MM SCREWS
2	1598.014	SS	DEPTH GAUGE FOR 1.5MM SCREWS
3	1598.032	SS	Depth Gauge for Ø 3.5 mm (0-60mm)for pediatric
4	421.030	SS	Depth Gauge for Ø 2.4/2.7 mm
5	421.034	SS	Depth Gauge for Ø 3.4 mm
6	421.035	SS	Depth Gauge for Ø 3.5 mm
7	421.045	SS	Depth Gauge for Ø 4.5 mm
8	903.150	SS	Depth Guage For Interlocking- Ø 4.9mm

GUIDES

#	Cat. No.	Metal	Sizes
1	1596.030	SS	Neutral & Loaded Drill Guide for Ø 2.7 mm screw
2	421.235	SS	Neutral & Loaded Drill Guide for Ø 3.5 mm screw
3	421.245	SS	Neutral & Loaded Drill Guide for Ø 4.5 mm screw

HAMMER

#	Cat. No.	Metal	Sizes
1	1856.012	SS	Bone Hammer with Fibre Handle 200 gms.
2	1856.015	SS	Bone Hammer with Fibre Handle 350 gms.
3	1856.025	SS	Bone Hammer with Fibre Handle 500 gms.
4	1856.027	SS	Bone Hammer with Fibre Handle 700 gms.
5	1856.035	SS	Bone Hammer with S.S. Handle 350gms.
6	1856.037	SS	Bone Hammer with S.S. Handle 500gms.
7	1856.051	SS	Bone Hammer Nylon Faced
8	904.130	SS	SLOTTED HAMMER FOR HUMERUS NAILS

HANDLES

#	Cat. No.	Metal	Sizes
1	1856.115	SS	T- Handle with S.S Chuck & Key
2	423.100	SS	Handle for Insertion of Steinmann Pin & Schanz Screw
3	423.110	SS	Gigli Saw Handle- 1 pair
4	423.140	SS	Quick Coupling Adaptor with T- Handle
5	423.141	SS	Quick Coupling Adaptor With Coupling end
6	423.200	SS	Spare S.S Chuck with Key
7	423.201	SS	HANDLE FOR LCP DRILL SLEEVE/ GUIDE 2.7/3.5MM
8	423.202	SS	HANDLE FOR LCP DRILL SLEEVE/ GUIDE 4.3 MM

HOOKS

#	Cat. No.	Metal	Sizes
1	1597.125	SS	Skin Hook Single Two Pronge For Hand System
2	1623.004	SS	Bone Hook- Medium
3	424.005	SS	Bone Hook- Small
4	424.015	SS	Bone Hook- Large
5	424.025	SS	SHARP HOOK
6	915.030	SS	Enders Nail Extractor Hook

IMPACTOR

#	Cat. No.	Metal	Sizes
1	424.100	SS	K. Nail Impactor
2	424.120	SS	Square Nail Impactor
3	424.140	SS	Rush Nail Impactor
4	424.145	SS	Enders Nail Impactor

INTRODUCERS

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	424.250	SS	Guide Wire/ K. Wire Introducer

LEVERS

#	Cat. No.	Metal	Sizes
1	1623.125	SS	Bone Lever with Serrated End - small
2	425.005	SS	Bone Lever Plain- Lane's type - Small
3	425.010	SS	Bone Lever Plain- Lane's type - Medium
4	425.015	SS	Bone Lever Plain- Lane's type - Large
5	425.105	SS	Bone Lever with Serrated End - Medium
6	425.110	SS	Bone Lever with Serrated End - Large

PLASTER CUTTING INSTRUMENTS

#	Cat. No.	Metal	Sizes
1	1871.005	SS	Electric Oscillating Plaster Cutting
2	1871.007	SS	Spare Oscillating Saw for Elec. Plaster cutter
3	1871.010	SS	Plaster Saw- Heavy Handle
4	1871.012	SS	Plaster Saw- Engel
5	1871.014	SS	Plaster Saw- Bergman
6	1871.016	SS	Plaster Spreader
7	1871.018	SS	Plaster Bender/ Twister
8	1871.020	SS	Plaster Opener Daws
9	1871.022	SS	Finger Plaster Saw- Window Opener
10	1871.024	SS	Plaster Scissors (Bohler)
11	431.260	SS	SAW BLADE

RASPS

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	432.030	SS	Rasp for Bipolar Prosthesis- LONG STEM

REAMER

#	Cat. No.	Metal	Sizes
1	433.006	SS	K. Nail Reamer Ø 6 mm
2	433.007	SS	K. Nail Reamer Ø 7 mm (20")
3	433.008	SS	K. Nail Reamer Ø 8 mm
4	433.009	SS	K. Nail Reamer Ø 9 mm
5	433.010	SS	K. Nail Reamer Ø 10 mm
6	433.011	SS	K. Nail Reamer Ø 11 mm
7	433.012	SS	K. Nail Reamer Ø 12 mm
8	433.013	SS	K. Nail Reamer Ø 13 mm
9	433.014	SS	K. Nail Reamer Ø 14 mm
10	433.015	SS	K. Nail Reamer Ø 15 mm
11	909.155	SS	Cannulated Hip pin Reamer 6.2 mm
12	909.160	SS	Cannulated Femoral Neck Screw Reamer 8mm

Hollow Mill Quick Coupling (Set of 3)

#	Cat. No.	Metal	Sizes
1	433.515	SS	Hollow Reamer/ Hollow Mill- Ø 1.5/ 2.0 mm
2	433.517	SS	Hollow Reamer/ Hollow Mill- Ø 2.4/ 2.7 mm
3	433.535	SS	Hollow Reamer/ Hollow Mill- Ø 3.5/ 4.0 mm
4	433.545	SS	Hollow Reamer/ Hollow Mill- Ø 4.5 mm

Cannulated Reamer (T-Handle) Ø 18 inch

#	Cat. No.	Metal	Sizes
1	434.006	SS	Cannulated Reamer (T-Handle) Ø 6 mm
2	434.007	SS	Cannulated Reamer (T-Handle) Ø 7 mm
3	434.008	SS	Cannulated Reamer (T-Handle) Ø 8 mm
4	434.009	SS	Cannulated Reamer (T-Handle) Ø 9 mm
5	434.010	SS	Cannulated Reamer (T-Handle) Ø 10 mm
6	434.011	SS	Cannulated Reamer (T-Handle) Ø 11 mm
7	434.012	SS	Cannulated Reamer (T-Handle) Ø 12 mm
8	434.013	SS	Cannulated Reamer (T-Handle) Ø 13 mm
9	434.014	SS	Cannulated Reamer (T-Handle) Ø 14 mm
10	434.015	SS	Cannulated Reamer (T-Handle) Ø 15 mm

RETRACTORS

#	Cat. No.	Metal	Sizes
1	435.005	SS	Self Retaining Retractor- Small
2	435.010	SS	Self Retaining Retractor- Medium
3	435.015	SS	Self Retaining Retractor- Large
4	435.025	SS	Self Retaining Retractor- Ex. Large
5	435.050	SS	Nerve Root Retractor (Set of 3)
6	435.060	SS	Nerve Root Retractor- Straight
7	435.065	SS	Nerve Root Retractor- 45 deg
8	435.070	SS	Nerve Root Retractor- 90 deg
9	435.080	SS	Bristow Retractor
10	435.090	SS	Dura Retractor
11	435.100	SS	Charnley Retractor with Weight & Chain
12	435.200	SS	Gelpi Retractor
13	659.104	SS	Bilateral Spine Retractor

Hohmann Retractors

#	Cat. No.	Metal	Sizes
1	1597.006	SS	Hohmann Retractor, Width- 06mm
2	1597.008	SS	Hohmann Retractor, Width- 08mm, L 220mm
3	1597.010	SS	Hohmann Retractor, Width- 10mm,
4	1597.012	SS	Hohmann Retractor, Width- 12mm,
5	1597.013	SS	Hohmann Retractor, Width- 13mm,
6	1597.014	SS	Hohmann Retractor, Width- 14mm,
7	1597.015	SS	Hohmann Retractor, Width- 15mm,
8	1597.016	SS	Hohmann Retractor, Width- 16mm,
9	1597.018	SS	Hohmann Retractor, Width- 18mm, L 235mm (short narrow tip)
10	1597.020	SS	Hohmann Retractor, Width- 20mm,
11	1597.022	SS	Hohmann Retractor, Width- 22mm,
12	1597.024	SS	Hohmann Retractor, Width- 24mm,
13	1597.025	SS	Hohmann Retractor, Width- 25mm,
14	1597.030	SS	Hohmann Retractor, Width- 30mm,
15	1597.043	SS	Hohmann Retractor, Width- 43mm, L 240mm
16	1597.044	SS	Hohmann Retractor, Width- 44mm, L 240mm
17	1597.070	SS	Hohmann Retractor, Width- 70mm, L 240mm
18	1597.236	SS	Cobra Retractor 36 mm
19	1597.240	SS	Cobra Retractor 40 mm
20	1597.248	SS	Cobra Retractor 48 mm
21	436.118	SS	Hohmann Retractor, Width- 18mm, L 235mm (Long Narrow Tip)
22	436.200	SS	HohmannRetractor,90° 25 mm forTHR/TKR
23	436.300	SS	S- Retractor for THR/ TKR - 20MM

REDUCTION FORCEP

#	Cat. No.	Metal	Sizes
1	437.015	SS	Reduction Forceps- Serrated Jaw, Speed Lock
2	437.017	SS	Reduction Forceps- Serrated Jaw- 170mm Speed Lock
3	437.020	SS	Reduction Forceps- Serrated Jaw- 210mm Speed Lock
4	437.024	SS	Reduction Forceps- Serrated Jaw- 240mm Speed Lock
5	437.030	SS	Reduction Forceps- Serrated Jaw- 300mm Speed Lock

Reduction Forceps- Pointed, Speed Lock

#	Cat. No.	Metal	Sizes
1	437.130	SS	Reduction Forceps- Pointed- 130mm Speed Lock
2	437.150	SS	Reduction Forceps- Pointed- 150mm Speed Lock
3	437.170	SS	Reduction Forceps- Pointed- 170mm Speed Lock
4	437.210	SS	Reduction Forceps- Pointed- 210mm Speed Lock
5	437.240	SS	Reduction Forceps- Pointed- 240mm Speed Lock

Reduction Forceps- Rachet Lock

#	Cat. No.	Metal	Sizes
1	1723.513	SS	Reduction Forceps- Pointed- 130mm Rachet Lock For Hand Fixation
2	1723.520	SS	Reduction Forceps- Pointed- 200mm Rachet Lock
3	437.340	SS	Reduction Forceps- Serrated Jaw- 140mm Rachet Lock
4	437.370	SS	Reduction Forceps- Serrated Jaw- 170mm Rachet Lock
5	437.375	SS	Reduction Forceps- Serrated Jaw- 210mm Rachet Lock

SCREW DRIVER

#	Cat. No.	Metal	Sizes
1	1617.012	SS	Hexagonal Screw Driver with Fibre Handle- Ø 3.5 mm Long For Pelvic
2	1617.019	SS	Hexagonal Screw Driver with Silicon Handle- Hex Ø 1.5 mm
3	1617.020	SS	Hexagonal Screw Driver with Silicon Handle- Ø 2.7 mm
4	1617.021	SS	Hexagonal Screw Driver with Silicon Handle- Ø 3.5 mm
5	1617.023	SS	Hexagonal Screw Driver with Silicon Handle- Ø 4.5 mm
6	1617.025	SS	Hexagonal Screw Driver with Silicon Handle- Hex Ø 4.5 mm
7	1617.116	SS	Star Screw Driver with Silicon Handle- Ø T6(1.5MM TIP)
8	1617.118	SS	Star Screw Driver with Silicon Handle- Ø T8 For 2.4/2.7mm
9	1617.306	SS	Star Screw Driver with Q.C Shaft- Ø T6 mm
10	1617.308	SS	Star Screw Driver with Q.C Shaft- Ø T8 mm
11	1706.023	SS	Screw Driver (Hexagonal) Ø 4.5mm for I.L
12	439.020	SS	Hexagonal Screw Driver with Fibre Handle- Ø 2.7 mm
13	439.035	SS	Hexagonal Screw Driver with Fibre Handle- Ø 3.5 mm
14	439.045	SS	Hexagonal Screw Driver with Fibre Handle- Ø 4.5 mm
15	439.050	SS	SCREW DRIVER FOR PFNA II NECK SCREW
16	439.119	SS	Hexagonal Screw Driver with Fibre Handle- Ø 1.5 mm
17	439.135	SS	POLY AXIL Hexagonal Screw Driver with Fibre Handle- Ø 3.5 mm
18	439.145	SS	POLY AXIAL Hexagonal Screw Driver with Fibre Handle- Ø 4.5 mm
19	439.151	SS	SCREW DRIVER WITH T- HANDLE 2.5MM FOR DISPOSABLE SLEEVE 1.8/ 2.0MM
20	439.152	SS	SCREW DRIVER WITH T- HANDLE 3.5MM FOR DISPOSABLE SLEEVE 2.8 MM
21	439.153	SS	SCREW DRIVER 4.5MM FOR DISPOSABLE SLEEVE 4.3 MM
22	439.160	SS	UNIVERSAL SCREW DRIVER WITH T- HANDLE FOR PFN / PFNA II
23	439.222	SS	Star Screw driver 1.5/2.0 (T6)
24	439.224	SS	Star Screw driver 2.4/2.7 (T8)
25	439.226	SS	Star Screw driver 3.5 (T15)
26	439.228	SS	Star Screw driver 4.5 (T25)
27	439.245	SS	Large Hexagonal Screw Driver with Holding Sleeve- Ø 4.5mm
28	439.350	SS	Small Hexagonal Screw Driver with Holding Sleeve- Ø 3.5 mm
29	439.515	SS	Hexagonal Screw Driver with Q.C Shaft- Ø 1.5 mm
30	439.520	SS	Hexagonal Screw Driver with Q.C Shaft- Ø 2.0 mm
31	439.535	SS	Hexagonal Screw Driver with Q.C Shaft- Ø 3.5 mm
32	439.545	SS	Hexagonal Screw Driver with Q.C Shaft- Ø 4.5 mm
33	439.612	SS	Spare Sleeve For Maxillofacial Screw Driver
34	439.613	SS	MAXILLOFACIAL SCREW DRIVER WITH SCREW HOLDING SLEEVE CROSS SLOTT with Q.C Shaft
35	439.614	SS	MAXILLOFACIAL SCREW DRIVER

Cannulated Screw Driver

#	Cat. No.	Metal	Sizes
1	1617.150	SS	Cannulated Screw Driver- Ã 2.7mm With Silicon Handle For Herburt Screw
2	1617.152	SS	Cannulated Screw Driver- Ø 3.5/ 4.0mm With Silicon Handle
3	1617.154	SS	Cannulated Screw Driver- Ã 4.5/ 6.5mm With Silicon Handle
4	1617.170	SS	Cannulated Screw Driver For Anchore Screw Plain
5	439.625	SS	CANNULATED SCREW DRIVER 2.0MM FOR HERBURT SCREW
6	439.635	SS	Cannulated Screw Driver- Ø 3.5/ 4.0mm
7	439.645	SS	Cannulated Screw Driver- Ø 4.5/ 6.5mm
8	439.655	SS	Cannulated Screw Driver- Ø 5.5mm
9	439.656	SS	Cannulated Screw Driver- Ø 4.0mm For 7.3mm Cannulated Screw

Torque Limiting Screw Driver

#	Cat. No.	Metal	Sizes
1	1617.206	SS	Star Torque Limiting Screw Driver Ø T6 For 1.5/2.0mm
2	439.830	SS	Torque Limiting Screw Driver Ø 2.4/2.7mm
3	439.840	SS	Torque Limiting Screw Driver Ø 3.5/4.0mm
4	439.850	SS	Torque Limiting Screw Driver Ø 4.5 /5.0mm
5	439.851	SS	TORQUE LIMITING HANDLE
6	439.855	SS	Star Torque Limiting Screw Driver Ø T8 For 2.4/2.7mm
7	439.857	SS	Star Torque Limiting Screw Driver ØT15 For 3.5/4.0mm
8	439.858	SS	StarTorque Limiting Screw Driver ØT25 For 4.5 /5.0mm

Crutch Filed Tong with 2 Burrs

#	Cat. No.	Metal	Sizes
1	440.100S	SS	Crutch Filed Tong with 2 Burrs- Small
2	440.105M	SS	Crutch Filed Tong with 2 Burrs- Medium
3	440.110L	SS	Crutch Filed Tong with 2 Burrs- Large
4	440.125	SS	2 Burrs (Spare) for Crutch Filed Tong

WIRE INSTRUMENTS

#	Cat. No.	Metal	Sizes
1	1621.001	SS	Jumbo Wire Cutter 14 "
2	1621.025	SS	Wire Passer with - small
3	1621.030	SS	Wire Passer with -medium
4	1621.035	SS	Wire Passer with - large
5	1621.070	SS	VICE GRIP PLIER
6	1723.175	SS	Nose Plier cum Wire Bender cum Wire Cutter- 175mm
7	440.225	SS	Nose Plier cum Wire Bender cum Wire Cutter- 225mm
8	440.230	SS	Tip Wire Cutter
9	440.260	SS	Wire Twister- Circular
10	440.270	SS	Wire Twister cum Cutter
11	440.275	SS	Wire Tightner cum Twister
12	440.280	SS	Wire Tightner with 2 Pegs- Zet type
13	440.285	SS	K wire tractor -CumTensioner
14	910.103	SS	WIRE SLEEVE 3.5MM
15	910.500	SS	WIRE SLEEVE 5.0MM
16	911.100	SS	Parallel Wire Guide
17	911.101	SS	Parallel Wire Guide Sleeve For HTO Plates
18	911.102	SS	Parallel Wire Guide Drill Sleeve For HTO Plates
19	GS0099	SS	K. WIRE INSTRUMENT SYSTEM

Flexible Reamer Shaft- Fix Heads

#	Cat. No.	Metal	Sizes
1	1616.113	SS	Proximal Flexible Reamer Shaft- Fix Heads - Ø 13.0 mm
2	1616.115	SS	Proximal Flexible Reamer Shaft- Fix Heads - Ø 15.0 mm
3	441.060	SS	Flexible Reamer Shaft- Fix Heads - Ø 6.0 mm
4	441.065	SS	Flexible Reamer Shaft- Fix Heads - Ø 6.5 mm
5	441.070	SS	Flexible Reamer Shaft- Fix Heads - Ø 7.0 mm
6	441.075	SS	Flexible Reamer Shaft- Fix Heads - Ø 7.5 mm
7	441.080	SS	Flexible Reamer Shaft- Fix Heads - Ø 8.0 mm
8	441.081	SS	Flexible Reamer Shaft- Fix Heads 24"
9	441.085	SS	Flexible Reamer Shaft- Fix Heads - Ø 8.5 mm
10	441.090	SS	Flexible Reamer Shaft- Fix Heads - Ø 9.0 mm
11	441.095	SS	Flexible Reamer Shaft- Fix Heads - Ø 9.5 mm
12	441.100	SS	Flexible Reamer Shaft- Fix Heads - Ø 10.0 mm
13	441.105	SS	Flexible Reamer Shaft- Fix Heads - Ø 10.5 mm
14	441.110	SS	Flexible Reamer Shaft- Fix Heads - Ø 11.0 mm
15	441.115	SS	Flexible Reamer Shaft- Fix Heads - Ø 11.5 mm
16	441.120	SS	Flexible Reamer Shaft- Fix Heads - Ø 12.0 mm
17	441.125	SS	Flexible Reamer Shaft- Fix Heads - Ø 12.5 mm
18	441.130	SS	Flexible Reamer Shaft- Fix Heads - Ø 13.0 mm
19	441.135	SS	Flexible Reamer Shaft- Fix Heads - Ø 13.5 mm
20	441.140	SS	Flexible Reamer Shaft- Fix Heads - Ø 14.0 mm
21	441.145	SS	Flexible Reamer Shaft- Fix Heads - Ø 14.5 mm
22	441.150	SS	Flexible Reamer Shaft- Fix Heads - Ø 15.0 mm
23	441.155	SS	Flexible Reamer Shaft- Fix Heads - Ã 15.5 mm
24	441.165	SS	Flexible Reamer Shaft- Fix Heads - Ã 16.5 mm
25	GS00102	SS	Flexible Reamer Box Empty

DRILL BIT- S.S

#	Cat. No.	Metal	Sizes
1	1611.001	SS	Drill Bit Ø 0.8mm Non Coupling
2	1611.002	SS	Drill Bit Ø 1.1 X 7 X 50mm For Maxillofacial Screw 1.5mm
3	1611.003	SS	Drill Bit Ø 1.1 X 12 X 48mm For Maxillofacial Screw 1.5mm
4	1611.005	SS	Drill Bit Ø 1.1 X 15 X 50mm For Maxillofacial Screw 1.5mm
5	1611.006	SS	Drill Bit Ø 1.6 X 12 X 48mm For Maxillofacial Screw 2.0mm
6	1611.010	SS	Drill Bit Ø 2.0 X 20 X 78mm For Maxillofacial Screw 2.7mm
7	1611.020	SS	Drill Bit Ø 1.5 X 7 X 50mm For Maxillofacial Screw 2.0mm
8	1611.022	SS	Drill Bit Ø 1.5 X 11 X 50mm For Maxillofacial Screw 2.0mm
9	1611.025	SS	Drill Bit Ø 1.5 X 15 X 50mm For Maxillofacial Screw 2.0mm
10	1611.055	SS	Drill Bit Ø 1.5mm x 100 mm- Non Coupling
11	1611.721	SS	Drill Bit Ø 3.2mm x 200 mm- Non Coupling
12	1611.738	SS	Drill Bit Ø 4.8mm x 200 mm- Non Coupling
13	1614.224	SS	Drill bit Ø 2.4mm x 28 mm x 200 x SH 4MM mm- Coupling End For Cervical Plate premium quality
14	426.011	SS	Drill Bit Ø 1.1mm x 125 mm- Non Coupling
15	426.015	SS	Drill Bit Ø 1.5mm x 125 mm- Non Coupling
16	426.018	SS	Drill Bit Ø 1.8mm x 125 mm- Non Coupling
17	426.020	SS	Drill Bit Ø 2.0mm x 125 mm- Non Coupling
18	426.025	SS	Drill Bit Ø 2.5mm x 125 mm- Non Coupling
19	426.027	SS	Drill Bit Ø 2.7mm x 125 mm- Non Coupling
20	426.030	SS	Drill Bit Ø 3.0mm x 125 mm- Non Coupling
21	426.032	SS	Drill Bit Ø 3.2mm x 125 mm- Non Coupling
22	426.035	SS	Drill Bit Ø 3.5mm x 125 mm- Non Coupling
23	426.040	SS	Drill Bit Ø 4.0mm x 125 mm- Non Coupling
24	426.041	SS	Drill Bit Ø 4.2mm x 125 mm- Non Coupling
25	426.045	SS	Drill Bit Ø 4.5mm x 125 mm- Non Coupling
26	426.150	SS	Drill Bit Ø5.0mm x 225 mm- Non Coupling
27	426.250	SS	Drill Bit Ø 4.0mm x 250 mm- Non Coupling

Drill Bit- Non Coupling, L- 225mm

#	Cat. No.	Metal	Sizes
1	1611.718	SS	Drill bit Ø 2.8mm x 225 mm- Non Coupling
2	1611.770	SS	Drill Bit Ø7.0mm x 225 mm- Non Coupling
3	426.125	SS	Drill Bit Ø 2.5mm x 225 mm- Non Coupling
4	426.127	SS	Drill Bit Ø 2.7mm x 225 mm- Non Coupling
5	426.130	SS	Drill Bit Ø 3.0mm x 225 mm- Non Coupling
6	426.132	SS	Drill Bit Ø 3.2mm x 225 mm- Non Coupling
7	426.135	SS	Drill Bit Ø 3.5mm x 225 mm- Non Coupling
8	426.140	SS	Drill Bit Ø 4.0mm x 225 mm- Non Coupling
9	426.145	SS	Drill Bit Ø 4.5mm x 225 mm- Non Coupling
10	426.225	SS	Drill Bit Ø 4.0 x 3.2mm x 225 mm- Non Coupling

Drill Bit- Non Coupling, L- 300mm

#	Cat. No.	Metal	Sizes
1	1612.028	SS	Drill bit Ø 4.3mm x 300 mm- Non Coupling
2	426.232	SS	Drill bit Ø 3.2mm x 300 mm- Non Coupling
3	426.240	SS	Drill bit Ø 4.0mm x 300 mm- Non Coupling
4	426.245	SS	Drill bit Ø 4.5mm x 300 mm- Non Coupling
5	426.300	SS	Drill bit Ø 4.0 x 3.2mm x 240 mm- Non Coupling

Drill Bit- Coupling End, L- 125mm

#	Cat. No.	Metal	Sizes
1	1612.115	SS	Drill Bit Ø 3.5 x 45mm With Pin For Blexible Shaft
2	427.004	SS	DRILL BIT 2.5MM X 68MM FOR BLEXIBLE SHAFT
3	427.005	SS	DRILL BIT 3.2MM X 68MM FOR BLEXIBLE SHAFT
4	427.012	SS	Drill Bit Ø 1.2mm x 125 mm- Coupling End
5	427.015	SS	Drill Bit Ø 1.5mm x 125 mm- Coupling End
6	427.018	SS	Drill Bit Ø 1.8 mm x 125 mm- Coupling End
7	427.018P	SS	Drill Bit Ø 1.8 mm x 125 mm- Coupling End(Prime)
8	427.020	SS	Drill Bit Ø 2.0mm x 125 mm- Coupling End
9	427.020P	SS	Drill Bit Ø 2.0mm x 125 mm- Coupling End(Prime)
10	427.022	SS	Drill Bit Ø 2.0mm x 175 mm- Coupling End FOR CERVICAL
11	427.023	SS	Drill Bit Ø 2.2mm x 175 mm- Coupling End FOR CERVICAL
12	427.025	SS	Drill Bit Ø 2.5mm x 125 mm- Coupling End
13	427.025P	SS	Drill Bit Ø 2.5mm x 125 mm- Coupling End(Prime)
14	427.026	SS	Drill Bit Ø 2.5mm x 175 mm- Coupling End
15	427.027	SS	Drill Bit Ø 2.7mm x 125 mm- Coupling End
16	427.027P	SS	Drill Bit Ø 2.7mm x 125 mm- Coupling End(Prime)
17	427.028	SS	Drill Bit Ø 2.8mm x 150 mm- Coupling End
18	427.030	SS	Drill Bit Ø 3.0mm x 125 mm- Coupling End
19	427.032	SS	Drill Bit Ø 3.2mm x 125 mm- Coupling End
20	427.032P	SS	Drill Bit Ø 3.2mm x 125 mm- Coupling End(Prime)
21	427.035	SS	Drill bit Ø 3.5mm x 125 mm- Coupling End
22	427.040	SS	Drill bit Ø 4.0mm x 125 mm- Coupling End
23	427.041	SS	Drill bit Ø 4.3mm x 150 mm- Coupling End
24	427.042	SS	Drill bit Ø 4.2mm x 125 mm- Coupling End
25	427.045	SS	Drill bit Ø 4.5mm x 125 mm- Coupling End
26	427.045P	SS	Drill bit Ø 4.5mm x 125 mm- Coupling End(Prime)
27	910.101	SS	Drill bit Ø 2.8mm x 175 mm- Coupling End

Drill Bit- Coupling End, L- 225mm

#	Cat. No.	Metal	Sizes
1	427.125	SS	Drill bit Ø 2.5mm x 225 mm- Coupling End
2	427.127	SS	Drill bit Ø 2.7mm x 225 mm- Coupling End
3	427.130	SS	Drill bit Ø 3.0mm x 225 mm- Coupling End
4	427.132	SS	Drill bit Ø 3.2mm x 225 mm- Coupling End
5	427.132P	SS	Drill bit Ø 3.2mm x 225 mm- Coupling End(Prime)
6	427.135	SS	Drill bit Ø 3.5mm x 225 mm- Coupling End
7	427.140	SS	Drill bit Ø 4.0mm x 225 mm- Coupling End
8	427.143	SS	Drill bit Ø 4.3mm x 225 mm- Coupling End
9	427.145	SS	Drill bit Ø 4.5mm x 225 mm- Coupling End
10	910.100	SS	LC-LCP Drill Bit Ø 2.8 mm x 225 mm Coupling End
11	910.100P	SS	LC-LCP Drill Bit Ã 2.8 mm x 225 mm Coupling End(Prime)
12	910.124	SS	LC-LCP Drill Bit- Calibrated Ø 4.2 mm x 225 mm Coupling
13	910.125	SS	LC-LCP Drill Bit- Calibrated Ø 4.3 mm x 225 mm Coupling
14	910.125P	SS	LC-LCP Drill Bit- Calibrated Ø 4.3 mm x 225 mm Coupling(Prime)

Drill Tap with T-Handle

#	Cat. No.	Metal	Sizes
1	429.015	SS	Drill Tap with T-Handle Ø 1.5 mm
2	429.020	SS	Drill Tap with T-Handle Ø 2.0 mm
3	429.024	SS	Drill Tap with T-Handle Ø 2.4 mm
4	429.027	SS	Drill Tap with T-Handle Ø 2.7 mm
5	429.035	SS	Drill Tap with T-Handle Ø 3.5 mm ( 20 TPI)
6	429.040	SS	Drill Tap with T-Handle Ø 4.0 mm ( 14 TPI, cancellous)
7	429.045	SS	Drill Tap with T-Handle Ø 4.5 mm
8	429.065	SS	Drill Tap with T-Handle Ø 6.5 mm (9 TPI, cancellous)
9	429.135	SS	Drill Tap with T-Handle Ø 3.5 mm ( 14 TPI, cancellous)

Drill Tap with Coupling End

#	Cat. No.	Metal	Sizes
1	429.213	SS	Drill Tap with Coupling End Ø 1.3 mm
2	429.215	SS	Drill Tap with Coupling End Ø 1.5 mm
3	429.220	SS	Drill Tap with Coupling End Ø 2.0 mm
4	429.224	SS	Drill Tap with Coupling End Ø 2.4 mm
5	429.227	SS	Drill Tap with Coupling End Ø 2.7 mm
6	429.235	SS	Drill Tap with Coupling End Ø 3.5 mm ( 20 TPI)
7	429.240	SS	Drill Tap with Coupling End Ø 4.0 mm
8	429.245	SS	Drill Tap with Coupling End Ø 4.5 mm
9	429.265	SS	Drill Tap with Coupling End Ø 6.5 mm (9 TPI, cancellous)
10	429.335	SS	Drill Tap with Coupling End Ø 3.5 mm ( 14 TPI, cancellous)

Cannulated Drill Tap with T-Handle- Calibrated

#	Cat. No.	Metal	Sizes
1	429.440	SS	Cannulated Drill Tap with T-Handle Ø 4.0 mm
2	429.445	SS	Cannulated Drill Tap with T-Handle Ø 4.5 mm
3	429.669	SS	Cannulated Drill Tap with T-Handle, Calibrated Ø 6.5 mm

Cannulated Drill Bit- Calibrated, L- 125mm

#	Cat. No.	Metal	Sizes
1	428.120	SS	Cannulated Drill Bit- Calibrated- Ø 2.0mm x 100 mm
2	428.125	SS	Cannulated Drill Bit- Calibrated- Ø 2.5mm x 125 mm
3	428.127	SS	Cannulated Drill Bit- Calibrated- Ø 2.7mm x 125 mm
4	428.130	SS	Cannulated Drill Bit- Calibrated- Ø 3.0mm x 125 mm
5	428.132	SS	Cannulated Drill Bit- Calibrated- Ø 3.2mm x 125 mm
6	428.135	SS	Cannulated Drill Bit- Calibrated- Ø 4.0mm x 125 mm
7	428.140	SS	Cannulated Drill Bit- Calibrated- Ø 4.5mm x 125 mm

Cannulated Drill Bit- Calibrated, L- 225mm

#	Cat. No.	Metal	Sizes
1	1614.246	SS	Cannulated Drill Bit- Calibrated- Ø 4.5mm x 225 mm For 7.3mm C.C Screws
2	428.227	SS	Cannulated Drill Bit- Calibrated- Ø 2.7mm x 180 mm
3	428.232	SS	Cannulated Drill Bit- Calibrated- Ø 3.2mm x 180 mm
4	428.235	SS	Cannulated Drill Bit- Calibrated- Ø 3.5mm x 180 mm
5	428.327	SS	Cannulated Drill Bit- Calibrated- Ø 2.7mm x 225 mm
6	428.335	SS	Cannulated Drill Bit- Calibrated- Ø 3.5mm x 225 mm
7	428.340	SS	Cannulated Drill Bit- Calibrated- Ø 4.0mm x 225 mm
8	428.345	SS	Cannulated Drill Bit- Calibrated- Ø 4.5mm x 225 mm
9	428.350	SS	Cannulated Drill Bit- Calibrated- Ø 5mm x 225 mm
10	428.360	SS	Cannulated Drill Bit- Calibrated- Ø 6mm x 225 mm

Bone Drill with S.S Chuck & Key

#	Cat. No.	Metal	Sizes
1	1873.009	SS	Electric Drill with S.S Chuck & Key with Foot Control in Box
2	1873.033	SS	Micromotor handpiece for maxillofacial
3	414.102	SS	Electric Drill with S.S Chuck & Key
4	414.103	SS	Adaptor for Flaxible Reamer
5	414.200	SS	Universal Bone Drill with S.S Chuck & Key- Closed gear
6	414.202	SS	Universal Bone Drill with S.S Chuck & Key- Open gear
7	414.300	SS	Micro Hand Drill with S.S Chuck & Key- Closed gear
8	414.302	SS	Micro Hand Drill with S.S Chuck & Key- Open gear

Bone File

#	Cat. No.	Metal	Sizes
1	440.325	SS	Bone File round and pointed
2	440.400	SS	bone file Flat - 100 mm
3	440.450	SS	bone file Flat -150 mm

Bone Plate Holding Forcep (Mani type)

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.

Box Punch

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.

Cannulated Reamer (T-Handle) Ø 22 inch

#	Cat. No.	Metal	Sizes
1	434.106	SS	Cannulated Reamer (T-Handle) Ø 6 mm
2	434.107	SS	Cannulated Reamer (T-Handle) Ø 7 mm
3	434.114	SS	Cannulated Reamer (T-Handle) Ø 14 mm
4	434.115	SS	Cannulated Reamer (T-Handle) Ø 15 mm

Cobbs Elevators with Fibre Handle-

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	417.200	SS	Cobbs Elevators with Fibre Handle-

Counter Sink

#	Cat. No.	Metal	Sizes
1	1623.403	SS	Counter Sink-Cannulated S.S. T-Handle Ø 2.0 mm
2	310.890	SS	Counter Sink- Ø 3.5mm
3	310.900	SS	Counter Sink-Cannulated S.S. T-Handle Ø 3.5 mm
4	890.120	SS	Counter Sink-Cannulated S.S. T-Handle Ø 4.5 mm
5	911.150	SS	Counter Sink- Ø 4.5mm

DHS Adjustable Angle Guide

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	200.303	SS	DHS Adjustable Angle Guide

Disc Forcep (Pitutary Rongeur)

#	Cat. No.	Metal	Sizes
1	438.410	SS	Disc Forcep (Pitutary Rongeur)- Straight
2	438.420	SS	Disc Forcep (Pitutary Rongeur)- Upward
3	438.430	SS	Disc Forcep (Pitutary Rongeur)- Downward
4	438.440	SS	Disc Forcep (Pitutary Rongeur)- Left
5	438.450	SS	Disc Forcep (Pitutary Rongeur)- Right

Femoral Distractor with Tomybar Large

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	417.102	SS	Femoral Distractor with Tomybar Large

Fibula Forcep

#	Cat. No.	Metal	Sizes
1	405.450	SS	Fibula Forcep- Bent
2	405.460	SS	Fibula Forcep- Straight

Flexible Reamer Shaft

#	Cat. No.	Metal	Sizes
1	441.059	SS	FLEXIBLE SHAFT FOR DRILL BIT
2	443.080	SS	Flexible Reamer Shaft- Ø 8.0 mm
3	443.090	SS	Flexible Reamer Shaft- Ø 9.0 mm
4	443.100	SS	Flexible Reamer Shaft- Ø 10.0 mm
5	443.101	SS	Flexible Reamer Shaft 24"

Hay Grooves Bone Holding Forcep

#	Cat. No.	Metal	Sizes
1	1723.020	SS	Hay Grooves Bone Holding Forcep- 200mm
2	1723.025	SS	Hay Grooves Bone Holding Forcep- 250mm
3	1723.030	SS	Hay Grooves Bone Holding Forcep- 300mm
4	1723.035	SS	Hay Grooves Bone Holding Forcep- 350mm

LC-LCP Drill Sleeve

#	Cat. No.	Metal	Sizes
1	1596.104	SS	LC-LCP Drill Sleeve/ Guide Ø 1.0 mm for lcp 1.5mm screws
2	1596.109	SS	SOLID SLEEVE Ø2.4MM
3	1596.119	SS	SOLID SLEEVE Ø3.5MM
4	1596.135	SS	LCP DRILL SLEEVE / GUIDE Ø 4.5 mm FOR PROXIMAL FEMUR PLATE
5	1596.140	SS	LCP WIRE SLEEVE / GUIDE 2.0MM FOR PROXIMAL FEMUR PLATE
6	1596.250	SS	LCP VAIRABLE ANGLE DRILL SLEEVE 0.8MM (Single Side) FOR 1.3MM SCREW
7	1596.251	SS	LCP VAIRABLE ANGLE DRILL SLEEVE 1.1MM (Single Side) FOR 1.5MM SCREW
8	1596.255	SS	LCP VAIRABLE ANGLE DRILL SLEEVE 1.5MM (Single Side)FOR 2.0MM SCREW
9	1596.258	SS	LCP VAIRABLE ANGLE DRILL SLEEVE 1.8MM
10	1596.268	SS	LCP VAIRABLE ANGLE DRILL SLEEVE 2.8MM
11	415.355	SS	LC-LCP Trochantric Sleeve 3.2mm
12	910.102	SS	LC-LCP Drill Sleeve/ Guide Ø 2.8 mm
13	910.104	SS	LC-LCP Combined Drill Sleeve Ø 2.5mm / 2.8 mm
14	910.105	SS	LC-LCP DRILL SLEEVE & TAP SLEEVE 2.0MM / 2.7MM
15	910.106	SS	LC-LCP Combined Drill Sleeve Ø 1.8mm / 2.4 mm
16	910.107	SS	LC-LCP Drill Sleeve/ Guide Ø 1.8 mm
17	910.108	SS	LC-LCP Drill Sleeve/ Guide Ø 2.0 mm
18	910.109	SS	DISPOSABLE SLEEVE 2.8MM
19	910.110	SS	DISPOSABLE SLEEVE 4.3MM
20	910.111	SS	DISPOSABLE SLEEVE 1.8MM
21	910.112	SS	DISPOSABLE SLEEVE 2.0MM
22	910.113	SS	LC-LCP Drill Sleeve/ Guide Ø 1.5 mm for lcp 2.0mm screws
23	910.128	SS	LC-LCP Drill Sleeve/ Guide Ø 4.3 mm
24	910.129	SS	LC-LCP Combined Drill Sleeve Ø 3.2mm / 4.3mm

Lifter

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.

Murphy Lane Bone Skid

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	901.005	SS	Murphy Lane Bone Skid

Osteotome with Fibre Handle

#	Cat. No.	Metal	Sizes
1	411.049	SS	Osteotome with Fibre Handle-4 mm, Straight
2	411.050	SS	Osteotome with Fibre Handle-5 mm, Straight
3	411.051	SS	Osteotome with Fibre Handle-5 mm, Curved
4	411.060	SS	Osteotome with Fibre Handle-6 mm, Straight
5	411.061	SS	Osteotome with Fibre Handle-6 mm, Curved
6	411.100	SS	Osteotome with Fibre Handle- 10 mm, Straight
7	411.101	SS	Osteotome with Fibre Handle- 10 mm,Curved
8	411.120	SS	Osteotome with Fibre Handle- 12 mm, Straight
9	411.121	SS	Osteotome with Fibre Handle- 12 mm, Curved
10	411.140	SS	Osteotome with Fibre Handle- 14 mm, Straight
11	411.150	SS	Osteotome with Fibre Handle- 15 mm, Straight
12	411.151	SS	Osteotome with Fibre Handle- 15 mm, Curved
13	411.180	SS	Osteotome with Fibre Handle- 18 mm, Straight
14	411.181	SS	Osteotome with Fibre Handle- 18 mm, Curved
15	411.200	SS	Osteotome with Fibre Handle- 20 mm, Straight
16	411.201	SS	Osteotome with Fibre Handle- 20 mm, Curved
17	411.240	SS	Osteotome with Fibre Handle- 24 mm, Straight
18	411.250	SS	Osteotome with Fibre Handle- 25 mm, Straight
19	411.251	SS	Osteotome with Fibre Handle- 25 mm, Curved
20	411.300	SS	Osteotome with Fibre Handle- 30 mm, Straight
21	411.301	SS	Osteotome with Fibre Handle- 30 mm, Curved

Osteotome with S.S Handle

#	Cat. No.	Metal	Sizes
1	1761.006	SS	Osteotome with S.S Handle-6 mm, Straight
2	1761.008	SS	Osteotome with S.S Handle-8 mm, Straight
3	1761.012	SS	Osteotome with S.S Handle- 12 mm, Straight
4	1761.013	SS	Osteotome with S.S Handle- 13 mm, Straight
5	1761.015	SS	Osteotome with S.S Handle- 15 mm, STRAIGHT
6	1761.018	SS	Osteotome with S.S Handle- 18 mm, Straight
7	1761.020	SS	Osteotome with S.S Handle- 20 mm, STRAIGHT
8	1761.024	SS	Osteotome with S.S Handle- 24 mm, Straight
9	1761.025	SS	Osteotome with S.S Handle- 25 mm, Straight
10	412.061	SS	Osteotome with S.S Handle-6 mm, Curved
11	412.081	SS	Osteotome with S.S Handle-8 mm, Curved
12	412.121	SS	Osteotome with S.S Handle- 12 mm, Curved
13	412.151	SS	Osteotome with S.S Handle- 15 mm, Curved
14	412.181	SS	Osteotome with S.S Handle- 18 mm, Curved
15	412.201	SS	Osteotome with S.S Handle- 20 mm, Curved
16	412.241	SS	Osteotome with S.S Handle- 24 mm, Curved
17	412.300	SS	Osteotome with S.S Handle- 30 mm, Straight
18	412.301	SS	Osteotome with S.S Handle- 30 mm, Curved

Osteotome without Handle

#	Cat. No.	Metal	Sizes
1	001.850	SS	Osteotome withoutHandle- 8 mm, Straight
2	001.851	SS	Osteotome withoutHandle- 8 mm, Curved
3	001.854	SS	Osteotome withoutHandle- 12 mm, Straight

Patella Holding Forcep

#	Cat. No.	Metal	Sizes
1	1723.617	SS	Patella Holding Forcep- 175mm
2	406.150	SS	Patella Holding Forcep- 150MM
3	406.210	SS	Patella Holding Forcep- 210mm
4	406.240	SS	Patella Holding Forcep- 240mm

Pelvic Reduction Forceps

#	Cat. No.	Metal	Sizes
1	398.730	SS	Pelvic ReductionForceps Asymmetrc/Uneven - 400MM With Pointed Ball Tip
2	398.742	SS	Pelvic Reduction Forceps For ScrewWith Speed Lock300 mm
3	398.744	SS	Pelvic Reduction Forceps For ScrewWith Speed Lock350 mm
4	398.840	SS	Pelvic ReductionForceps Oblique With Pointed Ball Tip Speed Lock Curved 200 mm
5	398.850	SS	Pelvic ReductionForceps Oblique With Pointed Ball Tip Speed Lock Curved 250 mm
6	398.852	SS	Pelvic ReductionForceps Oblique With Pointed Ball Tip Speed Lock Curved 400 mm
7	398.860	SS	Pelvic Reduction Forceps Oblique With Pointed Ball Tip Speed Lock Straight 400 mm
8	398.862	SS	Pelvic Reduction Forceps Oblique With Pointed Ball Tip Speed Lock Straight 250 mm
9	398.864	SS	Pelvic ReductionForceps Oblique With Pointed Ball Tip Speed Lock Straight 200 mm
10	398.870	SS	Pelvic Reduction Forceps With 3 Pointed Ball Tip Speed Lock400 mm
11	398.880	SS	Pelvic Reduction Forceps For Screw Adjustable For 4.5 MM -350 mm
12	398.882	SS	Pelvic Reduction Forceps For Screw Adjustable For 3.5 MM -350 mm

Periosteal Elevators with Fibre Handle

#	Cat. No.	Metal	Sizes
1	417.114	SS	Periosteal Elevators with Fibre Handle- Curved, 14mm
2	417.006	SS	Periosteal Elevators with Fibre Handle- Straight, 06mm
3	417.008	SS	Periosteal Elevators with Fibre Handle- Straight, 08mm
4	417.010	SS	Periosteal Elevators with Fibre Handle- Straight, 10mm
5	417.012	SS	Periosteal Elevators with Fibre Handle- Straight, 12mm
6	417.014	SS	Periosteal Elevators with Fibre Handle- Straight, 14mm
7	417.015	SS	Periosteal Elevators with Fibre Handle- Straight, 15mm
8	417.020	SS	Periosteal Elevators with Fibre Handle- Straight, 20mm
9	417.106	SS	Periosteal Elevators with Fibre Handle- Curved, 06mm
10	417.108	SS	Periosteal Elevators with Fibre Handle- Curved, 08mm
11	417.110	SS	Periosteal Elevators with Fibre Handle- Curved, 10mm
12	417.112	SS	Periosteal Elevators with Fibre Handle- Curved, 12mm
13	417.115	SS	Periosteal Elevators with Fibre Handle- Curved, 15mm
14	417.118	SS	Periosteal Elevators with Fibre Handle- Curved, 18mm
15	417.120	SS	Periosteal Elevators with Fibre Handle- Curved, 20mm

Rongeur

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	438.020	SS	Up Cutting Rongeur- Ø 2.0 mm

Self Centering Bone Holding Forcep

#	Cat. No.	Metal	Sizes
1	405.150	SS	Self Centering Bone Holding Forcep- 150 mm
2	405.170	SS	Self Centering Bone Holding Forcep- 170 mm
3	405.175	SS	Self Centering Bone Holding Forcep- 175 mm
4	405.190	SS	Self Centering Bone Holding Forcep- 190 mm
5	405.200	SS	Self Centering Bone Holding Forcep- 200 mm
6	405.240	SS	Self Centering Bone Holding Forcep- 240 mm
7	405.260	SS	Self Centering Bone Holding Forcep- 260 mm

Skull Traction (Semi Lunar Shape)

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	440.150	SS	Skull Traction (Semi Lunar Shape)

Steffee Instruments

#	Cat. No.	Metal	Sizes
1	417.104	SS	Steffee Compression Distraction Device with Tomybar
2	890.308	SS	Steffee Spanner- 8.0mm
3	890.311	SS	Steffee Spanner- 11.0mm
4	890.314	SS	Steffee Tap - 4.5 mm
5	890.315	SS	Steffee Tap - 5.5 mm
6	890.325	SS	Steffee Screw Intrroducer
7	890.332	SS	Steffee Awl

Flexible Reamer Cap

#	Cat. No.	Metal	Sizes
1	442.065	SS	Flexible Reamer Cap - Ø 6.5 mm
2	443.105	SS	Flexible Reamer Cap Box Empty
3	444.060	SS	Flexible Reamer Cap - Ø 6.0 mm
4	444.070	SS	Flexible Reamer Cap - Ø 7.0 mm
5	444.100	SS	Flexible Reamer Cap - Ø 10.0 mm
6	444.105	SS	Flexible Reamer Cap - Ø 10.5 mm
7	444.110	SS	Flexible Reamer Cap - Ø 11.0 mm
8	444.115	SS	Flexible Reamer Cap - Ø 11.5 mm
9	444.120	SS	Flexible Reamer Cap - Ø 12.0 mm
10	444.125	SS	Flexible Reamer Cap - Ø 12.5 mm
11	444.130	SS	Flexible Reamer Cap - Ø 13.0 mm
12	444.135	SS	Flexible Reamer Cap - Ø 13.5 mm
13	444.140	SS	Flexible Reamer Cap - Ø 14.0 mm
14	444.145	SS	Flexible Reamer Cap - Ø 14.5 mm
15	444.150	SS	Flexible Reamer Cap - Ø 15.0 mm
16	444.175	SS	Flexible Reamer Cap - Ø 7.5 mm
17	444.180	SS	Flexible Reamer Cap - Ø 8.0 mm
18	444.185	SS	Flexible Reamer Cap - Ø 8.5 mm
19	444.190	SS	Flexible Reamer Cap - Ø 9.0 mm
20	444.195	SS	Flexible Reamer Cap - Ø 9.5 mm
21	GS0093	SS	Flexible Reamer Cap Set With Box

CLIP

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	440.100	SS	TOWEL CLIP

K. Nail Driver

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.

Enders Nails Instruments

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	915.015	SS	Enders Nail Twister

Femoral Distractor with Tomybar Medium

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	417.101	SS	Femoral Distractor with Tomybar Medium

Femoral Distractor with Tomybar Small

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	417.100	SS	Femoral Distractor with Tomybar Small

Kerrison Punch

#	Cat. No.	Metal	Sizes
1	1724.001	SS	Kerrison Rongeur 7" X 1 mm
2	1724.002	SS	Kerrison Rongeur 7" X 2 mm
3	1724.003	SS	Kerrison Rongeur 7" X 3 mm
4	1724.004	SS	Kerrison Rongeur 7" X 4 mm
5	1724.005	SS	Kerrison Rongeur 7" X 5 mm
6	1724.052	SS	Kerrison Rongeur With Injector 7" X 2 mm
7	1724.053	SS	Kerrison Rongeur With Injector 7" X 3 mm
8	1724.054	SS	Kerrison Rongeur With Injector 7" X 4 mm
9	1724.055	SS	Kerrison Rongeur With Injector 7" X 5 mm
10	438.240	SS	Kerrison Punch 40° angle- 2.0mm Up Cutting
11	438.241	SS	Kerrison Punch 40° angle- 2.5mm Up Cutting
12	438.242	SS	Kerrison Punch 40° angle- 3.0mm Up Cutting
13	438.340	SS	Kerrison Punch 40° angle- Down Cutting
14	438.341	SS	Kerrison Punch 40° angle- Down Cutting
15	438.342	SS	Kerrison Punch 40° angle- Down Cutting

Drill Bit- Coupling End, L- 300mm

#	Cat. No.	Metal	Sizes
1	427.235	SS	Drill bit Ø 3.2mm x 300 mm- Coupling End
2	427.240	SS	Drill bit Ø 4.0mm x 300 mm- Coupling End

I.L Nailing Instruments

#	Cat. No.	Metal	Sizes
1	1706.224	SS	NAIL/ DRILL GUIDE BAR FOR TIBIA / FEMUR DISTAL JIG- OPTIONAL
2	1706.228	SS	NAIL CONNECTING BOLT FOR GREENS TIBIA NAILS - OPTIONAL
3	1706.324	SS	GUIDE WIRE HOLDER
4	903.100	SS	PROXIMAL COMBINED JIG FOR TIBIA/FEMUR
5	903.105	SS	INSERTION DRIVING HEAD
6	903.110	SS	RAM
7	903.115	SS	RAM ROD
8	903.120	SS	WRENCH 17.0mm
9	903.121	SS	Nail connecting Bolt For PFN
10	903.122	SS	Nail connecting Bolt For Tibia / Femur
11	903.125	SS	PROTECTION SLEEVE Ø 10.0 X 8.0MM
12	903.130	SS	DRILL SLEEVE Ø 8.0 X 4.0 MM
13	903.135	SS	TROCAR Ø 8.0MM
14	903.145	SS	TISSUE PROTECTOR
15	903.170	SS	TIBIA NAILS IMPLANTS BOX
16	903.171	SS	FEMORAL NAILS IMPLANTS BOX
17	903.180L	SS	DRILL GUIDE BAR FOR TIBIA / DISTAL JIG - LEFT- OPTIONAL
18	903.180R	SS	DRILL GUIDE BAR FOR TIBIA / DISTAL JIG RIGHT- OPTIONAL
19	903.190L	SS	DRILL GUIDE BAR FOR FEMUR/ DISTAL JIG LEFT- OPTIONAL
20	903.190R	SS	DRILL GUIDE BAR FOR FEMUR/ DISTAL JIG RIGHT- OPTIONAL
21	903.205	SS	WIRE SLEEVE Ø 8.0 X 1.8MM
22	903.225	SS	PLASTIC MEDULLARY NAIL (TEFLON ROD)
23	909.117	SS	WIRE SLEEVE Ã 8 X 2.5 MM SHORT FOR PFN
24	909.126	SS	Nail connecting Bolt FOR EXPERT A2FN NAILS

PFN Jig

#	Cat. No.	Metal	Sizes
1	909.001	SS	PFN JIG 135*
2	909.002	SS	EXPERT A2FN JIG 130*
3	909.100	SS	PFN Jig 130*

Maxillofacial System Box

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	600.000	SS	Maxillofacial system empty box

ACL Drill

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	906.140	SS	EYELET DRILL 2.5MM

Spine Instruments

#	Cat. No.	Metal	Sizes
1	1633.075	SS	Socket Wrench 11.0MM For Transvers Connector
2	446.003	SS	BLUNT PROBE - CURVED IMPORTED
3	446.045	SS	Spine Rod Cutter
4	446.046	SS	MESH PLATE CUTTER
5	446.048	SS	GREENS SPINE PERSUADER
6	900.637	SS	Polyaxial Screw Driver For 5.5MM Spine System
7	900.638	SS	Monoaxial Screw Driver For 5.5MM Spine System
8	900.639	SS	Greens Handle With Ratcheting Coupling
9	900.640	SS	ROD FORK
10	900.731	SS	GREENS FUNNEL (Imported)

Aluminum Box

#	Cat. No.	Metal	Sizes
1	1601.212	SS	LCP 3.5MM INSTRUMENTS BOX
2	1601.312	SS	LCP 5.0MM INSTRUMENTS BOX
3	910.501	SS	ALUMINUM SCREW BOX FOR 2.7 / 3.5MM SCEW
4	910.502	SS	ALUMINUM SCREW BOX FOR 4.5 / 5.0MM SCEW
5	910.503	SS	ALUMINUM SCREW TRAY FOR 4.5 / 5.0MM SCEW
6	GS.0430	SS	DISTAL RADIUS PLATE SCREW BOX
7	GS.0431	SS	DISTAL HUMERUS LOCKING PLATE SCREW BOX
8	GS.0432	SS	LATERAL TIBIA / DISTAL FEMUR PLATE SCREW BOX
9	GS.0433	SS	PROXIMAL TIBIA LOCKING PLATE SCREW BOX
10	GS.0434	SS	SMALL FRAGMENT PLATE SCREW BOX
11	GS.0435	SS	PROXIMAL HUMERUS PLATE SCREW BOX
12	GS.0436	SS	DISTAL TIBIA LOCKING PLATE SCREW BOX
13	GS.0437	SS	LARGE FRAGEMENT PLATE SCREW BOX
14	GS00100	SS	PELVIC IMPLANTS BOX
15	GS00169	SS	4.5/5.0MM COMBINED SCREW BOX
16	GS0052	SS	BOX FOR LARGE FRAGMENTS INSTRUMENTS FOR LF RETELIER SCREWS
17	GS0069	SS	2.4/3.5/4.5MM COMBINED SCREW BOX
18	GS0070	SS	LARGE CANNULATED SYSTEM BOX
19	GS0071	SS	2.4/3.5/4.0MM COMBINED SCREW BOX
20	GS0072	SS	LCP 2.4/3.5MM IMPLANTS AND INSTRUMENTS BOX FOR DISTAL RADIUS
21	GS0091	SS	BOX FOR TUBULAR EXTERNAL FIXATOR

Nail Extractor Instruments System

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1706.105	SS	Nail Extractor Instruments System

Enders Nail Set With Box

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	915.029	SS	Enders Nail Set With Box

Other Instruments

#	Cat. No.	Metal	Sizes
1	1632.017	SS	Posterior Cervical Mechanical Rod Pusher
2	1706.203	SS	EXTRACTOR ROD
3	1706.805	SS	COUPLING BLOCK FOR UHN EXTRACTION
4	900.666	SS	Posterior-Cervical Plate Holder
5	900.667	SS	Posterior-Cervical Plate Bender
6	900.668	SS	Drill Guide
7	900.669	SS	3N.M Torque Wrench
8	900.670	SS	Counter-Torque Wrench
9	900.671	SS	Posterior-Cervical Hex-Wrench
10	900.672	SS	Multi-Axial Screw Wrench
11	900.673	SS	Single-Axial Screw Wrench
12	900.674	SS	Preloaded Wrench
13	900.675	SS	Drill
14	900.676	SS	Posterior Cervical Rod Holder
15	900.677	SS	Posterior Cervical Hook Holder
16	900.678	SS	Lamina Detacher
17	900.679	SS	Internal Rod Bender
18	900.680	SS	Posterior Cervical Open Drill
19	900.681	SS	Posterior Cervical Tap
20	900.683	SS	Posterior Cervical Expanding Awl
21	900.684	SS	Cervical Positioning-Pin Sleeve
22	900.686	SS	Depth Gauge
23	900.687	SS	Posterior Cervical Compressor
24	900.688	SS	Posterior Cervical Distractor
25	900.689	SS	Posterior Cervical Rod Breaker
26	900.690	SS	Template Small
27	900.691	SS	Probe
28	900.692	SS	General Handle
29	900.693	SS	Positioning Pin
30	900.694	SS	Hook Deliver
31	900.695	SS	Posterior Cervical Screw Holder
32	903.123	SS	INSERTION / EXTRACTOR
33	903.124	SS	SLOTTED HAMMER
34	903.501	SS	Expert Tibia Nail Jig
35	903.502	SS	NAIL CONNECTING BOLT FOR EXPERT TIBIA NAIL
36	903.503	SS	PROTECTION SLEEVE 10.0 X 8.0 MM
37	903.504	SS	DRILL SLEEVE 8.0 X 4.0 MM
38	903.505	SS	TROCAR 8.0 MM
39	904.105	SS	COMPRESSION DEVICE FOR UHN
40	904.115	SS	COMPRESSION CONNECTING SCREW SOLID
41	904.120	SS	COUNPLING BLOCK FOR UHN EXTRACTION
42	904.125	SS	INSERT / EXTRACTOR FOR UHN
43	904.140	SS	PROTECTION SLEEVE 11.0 X 8.0 MM
44	904.145	SS	DRILL SLEEVE 8.0 X 2.7 MM
45	904.150	SS	TROCAR 8.0 MM for Humerus
46	904.155	SS	PROJECTILE REAMER(COUPLING END)
47	904.160	SS	COMBINATION WRENCH
48	904.165	SS	ALUMINIUM BOX WITH TRAY
49	904.175	SS	CONNECTING SCREW FOR UHN CANULETED
50	909.105	SS	PROTECTION SLEEVE Ø 12 X 10 MM
51	909.110	SS	PROTECTION SLEEVE Ø 10 X 08 MM
52	909.115	SS	WIRE SLEEVE Ø 8 X 2.5 MM
53	909.116	SS	WIRE SLEEVE Ø 10 X 2.5 MM
54	909.120	SS	TROCAR Ø 8.0 MM
55	909.125	SS	NAIL CONNECTING BOLT FOR PFN
56	909.135	SS	HEXAGONAL POLYAXIAL WRENCH Ø 8 MM
57	909.140	SS	DRILL SLEEVE Ø 8 X 4.0 MM
58	909.140A	SS	TROCAR 4.0 MM
59	909.145	SS	PROTECTION SLEEVE FOR TROCHANTERIC REAMER-SOLAPUR TYPE
60	909.150	SS	CANNULATED/TROCHANTERIC REAMER WITH T-HANDLE Ø 15.0 MM
61	909.162	SS	HIP PIN CANNULATED TAP 6.2MM
62	909.164	SS	FEMORAL NECK CANNULATED TAP 8.0MM
63	909.170	SS	Trocar Ø 10 MM

BLOCK FOR LOCKING PLATE

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	910.160	SS	BLOCK FOR PHILOS PLATE

V.A DISTAL RADIUS BOX

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	GS0008	SS	V.A DISTAL RADIUS BOX

CMF Micro/Mini Plate Instruments

#	Cat. No.	Metal	Sizes
1	1600.015	SS	GREENS CMF STRONG BEBEE PLIERS - OPATIONAL
2	1600.016	SS	GREENS CMF BEBEE SCISSORS - OPATIONAL
3	1600.017	SS	GREENS CMF LIGATURE PLIERS FORCEPS - OPATIONAL
4	446.701	SS	GREENS CMF REDUCTION FORCEPS
5	446.702	SS	GREENS CMF MODELING LEVER
6	446.703	SS	GREENS CMF PLATE PLIER
7	446.704	SS	GREENS CMF PLATE BENDER
8	446.705	SS	GREENS CMF PLATE CUTTER T.C. TIP
9	446.706	SS	GREENS CMF SMALL FREGMENT REDUCTION FORCEPS SERRATED
10	446.707	SS	GREENS CMF SMALL FREGMENT SELF CENTERING FORCEPS
11	446.708	SS	GREENS CMF WIRE CUTTER

JEWETT NAIL PLATES INSTRUMENTS

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.

Granules

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.

K. WIRE CONTAINER

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.

SAMPLE BAG

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	GS0090	SS	SAMPLE BAG

KUNTCHNER NAILS INSTRUMENTS SYSTEM

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	GS0092	SS	KUNTCHNER NAILS INSTRUMENTS SET

Cannulated Reamer (T-Handle) Ø 25 inch

#	Cat. No.	Metal	Sizes
1	434.128	SS	Cannulated Reamer 25"(T-Handle) Ø 8 mm
2	434.129	SS	Cannulated Reamer 25"(T-Handle) Ø 9 mm
3	434.130	SS	Cannulated Reamer 25"(T-Handle) Ø 10 mm
4	434.131	SS	Cannulated Reamer 25"(T-Handle) Ø 11 mm
5	434.132	SS	Cannulated Reamer 25"(T-Handle) Ø 12 mm

Drill Bit Coupling End 100 mm

#	Cat. No.	Metal	Sizes
1	1613.002	SS	Drill Bit Ã 1.1mm x 60mm Coupling End
2	1613.015	SS	Drill Bit Ø 2.5mm x 100 mm- Coupling End
3	1613.025	SS	Drill bit Ø 3.5mm x 100 mm- Coupling End

Drill bit 145 mm- Coupling End

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.

Drill Bit 110 mm- Coupling End

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.

Drill bit 115 mm- Coupling End

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.

Drill bit 195 mm- Coupling End

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.

Alasca Triangle

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.

Scissors

#	Cat. No.	Metal	Sizes
1	1724.071	SS	T.C Metzenbaum Scissors - Straight
2	1724.075	SS	T.C Metzenbaum Scissors - Curved

Needle Holder

#	Cat. No.	Metal	Sizes
1	1724.106	SS	Needle Holder T.C 6"
2	1724.108	SS	Needle Holder T.C 8: STR
3	1724.116	SS	Bozemann Needle Holder 6"
4	1724.118	SS	Bozemann Needle Holder 8"

Distractor For Locking Plate

#	Cat. No.	Metal	Sizes
1	1856.105	SS	DISTRACTOR FOR LOCKING PLATE
2	1856.108	SS	WIRE GUIDE SLEEVE 1.5 MM FOR DISTRACTOR LOCKING PLATE
3	1856.110	SS	WIRE GUIDE SLEEVE 2.0 MM FOR DISTRACTOR LOCKING PLATE
4	1856.112	SS	WIRE GUIDE SLEEVE 2.5 MM FOR DISTRACTOR LOCKING PLATE
5	1856.114	SS	WIRE GUIDE SLEEVE 3.0 MM FOR DISTRACTOR LOCKING PLATE
6	1856.116	SS	WIRE GUIDE SLEEVE 3.5 MM FOR DISTRACTOR LOCKING PLATE
7	1856.130	SS	GUIDE WIRE 1.5MM X 250MM FOR DISTRACTOR LOCKING PLATE
8	1856.132	SS	GUIDE WIRE 2.0MM X 250MM FOR DISTRACTOR LOCKING PLATE
9	1856.134	SS	GUIDE WIRE 2.5MM X 250MM FOR DISTRACTOR LOCKING PLATE
10	1856.136	SS	GUIDE WIRE 3.0MM X 250MM FOR DISTRACTOR LOCKING PLATE
11	1856.138	SS	GUIDE WIRE 3.5MM X 250MM FOR DISTRACTOR LOCKING PLATE

TEMPLATE

#	Cat. No.	Metal	Sizes
1	1623.212	SS	PLATE BENDER TEMPLET Ø 3.5
2	1623.214	SS	PLATE BENDER TEMPLET Ø 4.5

Lagenback Retractor

#	Cat. No.	Metal	Sizes
1	1597.105	SS	Lagenback Retractor Small
2	1597.110	SS	Lagenback Retractor Medium
3	1597.115	SS	Lagenback Retractor Large

BMI Scale

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.001	SS	BMI SCALE

Baby Scale - Digital

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.002	SS	BABY SCALE DIGITAL

Baby Scale - Analog

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.003	SS	BABY SCALE ANALOG

Weight and Height Scale

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.004	SS	WEIGHT AND HEIGHT SCALE

TRSCHEOSTOMY TUBE (CUFFED)

#	Cat. No.	Metal	Sizes
1	1892.007	SS	TRSCHEOSTOMY TUBE (CUFFED) 7.0MM
2	1892.008	SS	TRSCHEOSTOMY TUBE (CUFFED) 7.5MM

SKIN GRAFTING

#	Cat. No.	Metal	Sizes
1	1623.302	SS	SKIN GRAFTING HANDLE
2	1623.303	SS	SKIN GRAFTING BLADE

Examination and Treatment Couch

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.101	SS	Examination and Treatment Couch

Wooden Spatula

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.102	SS	Wooden Spatula

Army-Style Stretcher

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.103	SS	Army-Style Stretcher

Fowler Bed - Adult Patient

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.104	SS	Fowler Bed - Adult Patient

Delivery Couch

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.105	SS	Delivery Couch

Kidney Dish - 475 ml

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.106	SS	Kidney Dish - 475 ml

Reflex Hammer

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.107	SS	Reflex Hammer

Four-Section Patient Screen

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.108	SS	Four-Section Patient Screen

Dressing Instrument Set

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.109	SS	Dressing Instrument Set

Minor Surgery Instrument Set

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.11	SS	Minor Surgery Instrument Set

Mayo Type Instrument Table

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.111	SS	Mayo Type Instrument Table

Instrument Tray with Cover

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.112	SS	Instrument Tray with Cover

General Purpose Trolley

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.113	SS	General Purpose Trolley

Patient Stretcher Trolley

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.114	SS	Patient Stretcher Trolley

Tuning Fork

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.115	SS	Tuning Fork

Wheelchair - Adult

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.116	SS	Wheelchair - Adult

Humby Knife with Blade

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	1895.117	SS	Humby Knife with Blade

WRENCH

#	Cat. No.	Metal	Sizes
1	362.012	SS	T-Socket Wrench in S.S. 11mm
2	362.090	SS	T-Socket Wrench in S.S. 8mm
3	362.092	SS	T-Socket Wrench in S.S. 10mm
4	362.094	SS	L-Socket Wrench in S.S. 8mm
5	362.096	SS	L-Socket Wrench in S.S. 10mm
6	362.098	SS	L-Socket Wrench in S.S. 11mm